одержання бітуму, модифікованого низькомолекулярними органічними сполуками із нафтових залишків. 4. Встановлення оптимальних умов процесу модифікування гудрону формальдегідом та властивості модифікованих продуктів

[1] Muneraa, J.C.; Ossa, E.A. Polymer Modified Bitumen: Optimization and Selection. Mater. Design2016, 62, 91-97.https://doi.org/10.1016/j.matdes.2014.05.009
[2] Pyshyev, S.;Gunka, V.;Grytsenko, Yu.; Bratychak, M. Polymer Modified Bitumen: Review. Chem. Chem. Technol. 2016, 10 (4s), 631-636. https://doi.org/10.23939/chcht10.04si.631
[3] Gorkem, C., Sengoz, B. Predicting Stripping and Moisture Induced Damage of Asphalt Concrete Prepared with Polymer Modified Bitumen and Hydrated Lime. Constr. Build. Mater.2009, 23 (6), 2227-2236.https://doi.org/10.1016/j.conbuildmat.2008.12.001
[4] Brozyna, D., Kowalski, K.J. Assestment of Polyethylene-Modified Bitumen Adhesion Using Computer Image Analysis. Arch. Civ. Eng.2016, LXII (4), 3-18.https://doi.org/10.1515/ace-2015-0106
[5] Zielinski, K.; Babiak, M.; Ratajczak, M.; Kosno, J. Impact of Chemical and Physical Modification on Thermoplastic Characteristics of Bitumen. Procedia Eng. 2017, 172, 1297-1304.https://doi.org/10.1016/j.proeng.2017.02.159
[6]Nagurskyy, A.; Khlibyshyn, Y.; Grynyshyn, O.; Kochubei, V. Rubber Crumb Modified Bitumen Produced from Crude Oil Residuals of Ukrainian Deposits.Chem. Chem. Technol.2020, 14 (4) 420-425. https://doi.org/10.23939/chcht14.03.420
[7]Ibrahim, M. R.;Katman, H. Y.; Karim, M. R.;Koting, S.;Mashaan, N. S. A Review on the Effect of Crumb Rubber Addition to the Rheology of Crumb Rubber Modified Bitumen. Adv.Mater. Sci. Eng. 2013, 2013,1-8. https://doi.org/10.1155/2013/415246
[8] Bratychak, M.;Chervinskyy, T.;Astakhova, O.; Shyshchak, O.Bitumen Production via Tar Oxidation in the Presence of Petroleum Resin with Fluorine-Containing Groups. Chem. Chem. Technol. 2010, 4, 325-328. https://doi.org/10.23939/chcht04.04.325
[9] Grynyshyn, O.;Bratychak, M.;Krynytskiy, V.; Donchak, V. Petroleum Resins for Bitumens Modification. Chem. Chem. Technol. 2008, 2, 47-53.https://doi.org/10.23939/chcht02.01.047
[10] Strap, G.;Astakhova, O.;Lazorko, O.; Shyshchak, O.; Bratychak, M.Modified Phenol-Formaldehyde Resins and Their Application in Bitumen-Polymeric Mixtures. Chem. Chem. Technol. 2013, 7, 279-287. https://doi.org/10.23939/chcht07.03.279
[11] Bratychak, M.;Iatsyshyn, O.;Shyshchak, O.; Astakhova, O.; Janik, H.Carboxy Derivative of DioxydiphenylpropaneDiglycidyl Ether Monomethacrylate as an Additive for Composites.Chem. Chem. Technol, 2017, 11, 49-54. https://doi.org/10.23939/chcht11.01.049
[12] Sidun, I.;Solodkyy, S.; Shved, M.; Astakhova, O.; Shyshchak, O.; Bratychak, M.Obtaining of Coumarone-Indene Resins based on Light Fraction of Coal Tar. 5. Emulsions on the Basis of Bitumen Modified by Coumarone-Indene Resins with Epoxy Groups. Chem. Chem. Technol.2019, 13, 489-494. https://doi.org/10.23939/chcht13.04.489
[13] Demchuk, Y.;Gunka, V.;Pyshyev, S.; Sidun, I.; Hrynchuk, Y.; Kucinska-Lipka, J.; Bratychak, M.Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin. Chem. Chem. Technol. 2020, 14, 251-256. https://doi.org/10.23939/chcht14.02.251
[14] Demchuk, Y.;Gunka, V.;Sidun, I.;Solodkyy, S. Comparison of Bitumen Modified by Phenol Formaldehyde Resins Synthesized from Different Raw Materials.Proc. of EcoComfort.2020, 100, 95-102https://doi.org/10.1007/978-3-030-57340-9_1
[15] Gunka, V.;Demchuk, Y.;Sidun, I.;Miroshnichenko, D.;Nyakuma, B.B.; Pyshyev, S. Application of phenol-cresol-formaldehyde resin as an adhesion promoter for bitumen and asphalt concrete. Road Mater. Pavement Des.2020, 22(12),2906-2918.https://doi.org/10.1080/14680629.2020.1808518
[16] Bratychak, M.; Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 1. Effect of Solvent Nature on the Properties of Petroleum Residues Modified with Folmaldehyde.Chem. Chem. Technol. 2021, 15 (2), 274-283. https://doi.org/10.23939/chcht15.02.274
[17]Gunka, V.; Demchuk, Y.; Sidun, I.; Kochubei, V.; Shved. M.;Romanchuk, V.; Korchak, B. Chemical modification of road oil bitumens by formaldehyde.Pet. Coal.2020, 62(1), 420-429.
[18] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 2. Bitumen Modified with Maleic Anhydride. Chem. Chem. Technol. 2021, 15 (3), 443-449. https://doi.org/10.23939/chcht15.03.443
[19] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Poliak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 2. Tar Modified with Formaldehyde. Chem. Chem. Technol. 2021, 15 (4), 608-620.https://doi.org/10.23939/chcht15.04.608
[20] Singh, B.; Lokesh, K.; Gupta, M.; Chauhan, G.S. Polymer-Modified Bitumen of Recycled LDPE and Maleated Bitumen. J. Appl. Polym. Sci.2013, 127, 67-78. https://doi.org/10.1002/app.36810
[21] Tsegelyk, G.G. OsnovyEkonometrii; Vydavnutsvo LNU im. Franka: Lviv, 2011.
[22] Bolshev, L.N.; Smirnov, N.B. TablitsyMatematicheskoiStatistiki; Nauka: Moskva, 1983.