Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 6. Temperature Effect on the Chemical Modification of Bitumen with Maleic Anhydride
Affiliation:
1 Lviv Polytechnic National University
12 S.Bandery St., Lviv 79013, Ukraine
mbratychak@gmail.com
DOI:
https://doi.org/10.23939/chcht16.03.475
| Attachment | Size |
|---|---|
 full_text.pdf | 1.13 MB |
Abstract:
The oxidized bitumen produced at the Ukrainian refinery was modified with maleic anhydride. The process temperature was proved to have the most significant effect on modification. The chemical interaction of maleic anhydride with the components of oxidized bitumen was confirmed. At low temperatures (up to 403 K) the chemistry of the modification process is another than chemistry of the process carried out at high temperatures. The structures of the modified bitumen were established at different process temperatures (403, 423 and 443 K) using FTIR spectroscopy. A thin film heating at 436 K (RTFOT method) was performed for the bitumen under study. It was found that for bitumen modified at 403 K, the formed structure is destroyed after heating by RTFOT, which is confirmed by a decrease in the softening point of the bitumen. The FTIR spectra of the original oxidized bitumen and bitumen modified with maleic anhydride at 403 and 443 K were recorded after the RTFOT heating process. Based on the obtained data, the structural transformations that occurred during heating were established.
References:
[1] Zhu, J.; Birgisson, B.; Kringos, N. Polymer Modification of Bitumen: Advances and Challenges. Eur. Polym. J. 2014, 54. 18-38. https://doi.org/10.1016/j.eurpolymj.2014.02.005
https://doi.org/10.1016/j.eurpolymj.2014.02.005
[2] Koval, I.; Starchevskyy, V. Gas Nature Effect on the Destruction of Various Microorganisms under Cavitation Action. Chem. Chem. Technol. 2020, 14 (2), 264-270. https://doi.org/10.23939/chcht14.02.264
https://doi.org/10.23939/chcht14.02.264
[3] Shevchuk, L.; Strogan, O.; Koval, I. Equipment for Magnetic-Cavity Water Disinfection. Chem. Chem. Technol. 2012, 2 (6), 219-223. https://doi.org/10.23939/chcht06.02.219
https://doi.org/10.23939/chcht06.02.219
[4] Polacco, G.; Berlincioni, S.; Biondi, D.; Stastna, J.; Zanzotto, L. Asphalt Modification with Different Polyethylene-Based Polymers. Eur. Polym. J. 2005, 41, 2831-2844. https://doi.org/10.1016/j.eurpolymj.2005.05.034
https://doi.org/10.1016/j.eurpolymj.2005.05.034
[5] Giavarini, C.; De Filippis, P.; Santarelli, M.L.; Scarsella, M. Production of Stable Polypropylene-Modified Bitumens. Fuel 1996, 75, 681-686. https://doi.org/10.1016/0016-2361(95)00312-6
https://doi.org/10.1016/0016-2361(95)00312-6
[6] Abdel-Goad, M.A.H. Waste Polyvinyl Chloride-Modified Bitumen. J. Appl. Polym. Sci. 2006, 101(3), 1501-1505. https://doi.org/10.1002/app.22623
https://doi.org/10.1002/app.22623
[7] Padhan, R.K.; Sreeram, A.; Mohanta, C.S. Chemically Recycled Polyvinyl Chloride as a Bitumen Modifier: Synthesis, Characterisation and Performance evaluation. Road Mater. Pavement Des. 2021, 22(3), 639-652. https://doi.org/10.1080/14680629.2019.1614968
https://doi.org/10.1080/14680629.2019.1614968
[8] Lu, X.; Isacsson, U. Modification of Road Bitumens with Thermoplastic Polymers. Polym. Test. 2000, 20(1), 77-86. https://doi.org/10.1016/S0142-9418(00)00004-0
https://doi.org/10.1016/S0142-9418(00)00004-0
[9] Becker, M.Y.; Muller, A.J.; Rodriguez, Y. Use of Rheological Compatibility Criteria to Study SBS Modified Asphalts. J. Appl. Polym. Sci. 2003, 90, 1772-1782. https://doi.org/10.1002/app.12764
https://doi.org/10.1002/app.12764
[10] Jasso, M.; Hampl, R.; Vacin, O.; Bakos, D.; Stastna, J.; Zanzotto, L. Rheology of Conventional Asphalt Modified with SBS, Elvaloy and Polyphosphoric acid. Fuel Process. Technol. 2015, 140, 172-179. https://doi.org/10.1016/j.fuproc.2015.09.002
https://doi.org/10.1016/j.fuproc.2015.09.002
[11] Zhang, H.; Su, C.; Bu, X.; Zhang, Y.; Gao, Y.; Huang, M. Laboratory Investigation on the Properties of Polyurethane/Unsaturated Polyester Resin Modified Bituminous Mixture. Constr. Build. Mater. 2020, 260, 119865. https://doi.org/10.1016/j.conbuildmat.2020.119865
https://doi.org/10.1016/j.conbuildmat.2020.119865
[12] Gunka, V.; Demchuk, Yu.; Pyshyev, S.; Starovoit, A.; Lypko, Y. The Selection of Raw Materials for the Production of Road Bitumen Modified by Phenol-Cresol-Formaldehyde Resins. Pet. Coal 2018, 60 (6), 1199-1206.
[13] Demchuk, Y.; Sidun, I.; Gunka, V.; Pyshyev, S.; Solodkyy, S. Effect of Phenol-Cresol-Formaldehyde Resin on Adhesive and Physico-Mechanical Properties of Road Bitumen. Chem. Chem. Technol. 2018, 12 (4), 456-461. https://doi.org/10.23939/chcht12.04.456
https://doi.org/10.23939/chcht12.04.456
[14] Pyshyev, S.; Demchuk, Y.; Gunka, V.; Sidun, I.; Shved, M.; Bilushchak, H.; Obshta, A. Development of Mathematical Model and Identification of Optimal Conditions to Obtain Phenol-Cresol-Formaldehyde Resin. Chem. Chem. Technol. 2019, 13 (2), 212-217. https://doi.org/10.23939/chcht13.02.212
https://doi.org/10.23939/chcht13.02.212
[15] Demchuk, Y.; Gunka, V.; Pyshyev, S.; Sidun, I.; Hrynchuk, Y.; Kucinska-Lipka, J.; Bratychak, M. Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin. Chem. Chem. Technol. 2020, 14 (2), 251-256. https://doi.org/10.23939/chcht14.02.251
https://doi.org/10.23939/chcht14.02.251
[16] Gunka, V.; Demchuk, Y.; Sidun, I.; Miroshnichenko, D.; Nyakuma, B.B.; Pyshyev, S. Application of Phenol-Cresol-Formaldehyde Resin as an Adhesion Promoter for Bitumen and Asphalt Concrete. Road Mater. Pavement Des. 2021, 22 (12), 2906-2918. https://doi.org/10.1080/14680629.2020.1808518
https://doi.org/10.1080/14680629.2020.1808518
[17] Demchuk, Y.; Gunka, V.; Sidun, I.; Solodkyy, S. Comparison of Bitumen Modified by Phenol Formaldehyde Resins Synthesized from Different Raw Materials. Proc. of EcoComfort. 2020, 100, 95-102 https://doi.org/10.1007/978-3-030-57340-9_1
https://doi.org/10.1007/978-3-030-57340-9_1
[18] Pyshyev, S.; Demchuk, Y.; Poliuzhyn, I.; Kochubei, V. Obtaining and Use Adhesive Promoters to Bitumen from the Phenolic Fraction of Coal Tar. Int. J. Adhes. Adhes. 2022, 118, 103191. https://doi.org/10.1016/j.ijadhadh.2022.103191
https://doi.org/10.1016/j.ijadhadh.2022.103191
[19] Strap, G.; Astakhova, O.; Lazorko, O.; Shyshchak, O.; Bratychak, M. Modified Phenol-Formaldehyde Resins and Their Application in Bitumen-Polymeric Mixtures. Chem. Chem. Technol. 2013, 7, 279-287. https://doi.org/10.23939/chcht07.03.279
https://doi.org/10.23939/chcht07.03.279
[20] Bratychak, M.; Grynyshyn, O.; Astakhova, O.; Shyshchak, O.; Wacławek, W. Functional Petroleum Resins Based on Pyrolysis By-Products and Their Application for Bitumen Modification. Ecol. Chem. Eng. 2010, 17, 309-315.
[21] Gunka, V.; Demchuk, Y.; Sidun, I.; Kochubei, V.; Shved. M.; Romanchuk, V.; Korchak, B. Chemical Modification of Road Oil Bitumens by Formaldehyde. Pet. Coal 2020, 62 (1), 420-429.
[22] Bratychak, M.; Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 1. Effect of Solvent Nature on the Properties of Petroleum Residues Modified with Folmaldehyde. Chem. Chem. Technol. 2021, 15 (2), 274-283. https://doi.org/10.23939/chcht15.02.274
https://doi.org/10.23939/chcht15.02.274
[23] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 2. Bitumen Modified with Maleic Anhydride. Chem. Chem. Technol. 2021, 15 (3), 443-449. https://doi.org/10.23939/chcht15.03.443
https://doi.org/10.23939/chcht15.03.443
[24] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Poliak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 3. Tar Modified with Formaldehyde. Chem. Chem. Technol. 2021, 15 (4), 608-620. https://doi.org/10.23939/chcht15.04.608
https://doi.org/10.23939/chcht15.04.608
[25] Gunka, V.; Bilushchak, H.; Prysiazhnyi, Yu.; Demchuk, Yu.; Hrynchuk, Yu.; Sidun, I.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 4. Determining the Optimal Conditions for Tar Modification with Formaldehyde and Properties of the Modified Products. Chem. Chem. Technol. 2022, 16 (1), 142-149. https://doi.org/10.23939/chcht16.01.142
https://doi.org/10.23939/chcht16.01.142
[26] Gunka, V.; Prysiazhnyi, Yu.; Demchuk, Yu.; Hrynchuk, Yu.; Sidun, I.; Reutskyy, V.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 5. Use Of Maleic Anhydride For Foaming Bitumens. Chem. Chem. Technol. 2022, 16 (2), 295-302. https://doi.org/10.23939/chcht16.02.295
https://doi.org/10.23939/chcht16.02.295
[27] Wręczycki, J.; Demchuk, Y.; Bieliński, D.M.; Bratychak, M.; Gunka, V.; Anyszka, R.; Gozdek, T. Bitumen Binders Modified with Sulfur/Organic Copolymers. Materials 2022, 15(5), 1774. https://doi.org/10.3390/ma15051774
https://doi.org/10.3390/ma15051774
[28] Herrington, P.R.; Wu, Y.; Forbes, M.C. Rheological Modification of Bitumen with Maleic Anhydride and Dicarboxylic Acids. Fuel 1999, 78 (1), 101-110. https://doi.org/10.1016/S0016-2361(98)00120-3
https://doi.org/10.1016/S0016-2361(98)00120-3
[29] Kang, Y.; Wang, F.; Chen, Z. Reaction of Asphalt and Maleic Anhydride: Kinetics and Mechanism. Chem. Eng. J. 2010, 164 (1), 230-237. https://doi.org/10.1016/j.cej.2010.08.020
https://doi.org/10.1016/j.cej.2010.08.020
[30] BS EN 1427:2015, Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method, 2015.
[31] BS EN 1426:2015, Bitumen and bituminous binders. Determination of needle penetration, 2015.
[32] BS EN 12593:2015, Bitumen and bituminous binders. Determination of the Fraass breaking point, 2015
[33] BS EN 13587:2016, Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method, 2016.
[34] DSTU 8787:2018 (National Standard of Ukraine), Bitumen and bituminous binders. Determination of adhesion with crushed stone, 2018.
[35] BS EN 12607-1:2014, Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air RTFOT method, 2014.
Current Issues
The journal is accepted into Emerging Sources Citation Index (ESCI) - new index in the Web of Science™ Core Collection
The journal is indexed in the international scientometric databases:
