Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin

Yuriy Demchuk1, Volodymyr Gunka1, Serhiy Pyshyev1, Iurii Sidun2, Yurii Hrynchuk1, Justyna Kucinska-Lipka3, Michael Bratychak1
Affiliation: 
1 Institute of Chemistry and Chemical Technology Lviv Polytechnic National University, 12, Bandera St., 79013 Lviv, Ukraine 2 Institute of Building and Environmental Engineering, Lviv Polytechnic National University, 12, Bandera St., 79013 Lviv, Ukraine 3 Department of Polymer Technology, Gdansk University of Technology, 11/12, G. Narutowicza St., 80-233 Gdansk, Poland yuriy_demchuk@ukr.net
DOI: 
https://doi.org/10.23939/chcht14.02.251
AttachmentSize
PDF icon full_text.pdf269.12 KB
Abstract: 
Slow-breaking monophase cationic bitumen emulsions have been produced on the basis of bitumen modified with phenol-cresol-formaldehyde resin (PhCR-F). Bitumen emulsions were used as a binder for thin-layer coatings with slurry surfacing mixes (SSM). Physical and technical parameters of modified and unmodified emulsions were determined and analyzed. The optimal compositions of SSM were selected according to the breaking criterion. The values of SSM wet track abrasion were determined. It was found that the addition of PhCR-F allows to improve the adhesion properties of the thin-layer coatings.
References: 

[1] Fang X., Garcia-Hernandez A., Lura P.: RILEM Techn. Lett., 2016, 10, 116. https://doi.org/10.21809/rilemtechlett.2016.23
[2] Al Nageim H., Al-Busaltan S., Atherton W. et al.: Construct. Build. Mater., 2012, 36, 743. https://doi.org/10.1016/j.conbuildmat.2012.06.032
[3] Al-Hdabi A., Al Nageim H., Seton L.: Construct. Build. Mater., 2014, 69, 362. https://doi.org/10.1016/j.conbuildmat.2014.07.081
[4] Boucard L., Schmitt V., Farcas F. et al.: Road Mater. Pavement Design, 2015, 16, 330. https://doi.org/10.1080/14680629.2015.1030910
[5] Thanaya I., Zoorob S., Forth J.: Proc. Inst. Civil Eng. Transport, 2009, 162, 47. https://doi.org/10.1680/tran.2009.162.1.47
[6] Sidun Iu., Solodkyy S., Vollis O.: J. Civil Eng., Environ., Architect., 2018, XXXV, 83. http://doi.prz.edu.pl/pl/pdf/biis/1063
[7] Pyshyev S., Grytsenko Y., Solodkyy S. et al.: Chem. Chem. Technol., 2015, 9, 359. https://doi.org/10.23939/chcht09.03.359
[8] Sidun Iu., Solodkyy S., Shved M, et al.: Chem. Chem. Technol., 2019, 13, 489. https://doi.org/10.23939/chcht13.04.489
[9] Sidun Iu., Vollis O., Solodkyy S. et al.: [in:] Blikharskyy Z., Koszelnik P., Mesaros P. (Eds.), Lecture Notes in Civil Engineering. CEE 2019: Proceedings of CEE 2019. Springer 2019, 47, 420. https://doi.org/10.1007/978-3-030-27011-7_53
[10] Demchuk Y., Sidun Iu., Gunka V. et al.: Chem. Chem. Technol., 2018, 12, 456. https://doi.org/10.23939/chcht12.04.456
[11] Pyshyev S., Demchuk Yu., Gunka V. et al.: Chem. Chem. Technol., 2019, 13, 212. https://doi.org/10.23939/chcht13.02.212
[12] Gunka V., Demchuk Yu., Pyshyev S. et al: Pet. Coal, 2018, 60, 1199.
[13] Pyshyev S.,Demchuk Y., Gunka V.: Uglekhim. Zh., 2019, 4, 27. https://doi.org/10.31081/1681-309X-2019-0-4-27-33
[14] EN 1426:2000. European Standard. Bitumen and bituminous binders. Methods of tests for petroleum and its products. Determination of needle penetration.
[15] EN 1427:2007. European Standard. Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method.
[16] EN 13589:2008. European Standard. Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method.
[17] http://online.budstandart.com/ua/catalog/doc-page?id_doc=6392
[18] http://online.budstandart.com/ua/catalog/doc-page.html?id_doc=4917
[19] EN 12593. European Standard. Bitumen and bituminous binders. Determination of the Fraas breaking point.
[20] EN 12591. European Standard. Bitumen and bituminous binders - Specifications for paving grade bitumens.
[21] ISSA A143. Recommended Performance Guideline For Micro Surfacing, 2010.
[22] ISSA Technical Bulletin 113. Test Method for Determining Mix Time for SSM Systems, 2017.
[23] ISSA Technical Bulletin 100. Laboratory Test Method for Wet Track Abrasion of SSM Systems, 2018.
[24] EN 12274-4. European Standard.Slurry surfacing. Test methods. Determination of cohesion of the mix.
[25] http://online.budstandart.com/ua/catalog/doc-page.html?id_doc=60842
[26] http://online.budstandart.com/ua/catalog/doc-page?id_doc=54091