Effect of Bisphenol-Formaldehyde Resin on Physico-Mechanical Properties of Road Bitumen
Affiliation:
1 Lviv Polytechnic National University, 12 S.Bandery St., 79013 Lviv, Ukraine
2 Danylo Halytsky Lviv National Medical University, 69 Pekarska St., 79010 Lviv, Ukraine
yuriy_demchuk@ukr.net
DOI:
https://doi.org/10.23939/chcht18.01.023
| Attachment | Size |
|---|---|
 full_text.pdf | 392.88 KB |
Abstract:
A bisphenol-formaldehyde resin was synthesized using the polycondensation method of bisphenol A with formaldehyde. Road bitumen has been modified with this resin. The possibility of its use as a road petroleum bitumen modifier has been established for different contents of the synthesized resin. It has been established that the introduction of synthesized bisphenol-formaldehyde resin into the composition of bitumen significantly increases its heat resistance. The synthesized resin and modified bitumens were characterized using IR spectroscopy. The change in the composition and properties of the bitumen modified with bisphenol-formaldehyde resin has been described.
References:
[1] Pstrowska, K.; Gunka, V.; Sidun, I.; Demchuk, Y.; Vytrykush, N.; Kułażyński, M.; Bratychak, M. Adhesion in Bitumen/Aggregate System: Adhesion Mechanism and Test Methods. Coatings 2022, 12, 1934-1952. https://doi.org/10.3390/coatings12121934
https://doi.org/10.3390/coatings12121934
[2] Hrynchuk, Yu.; Sidun, Iu.; Gunka, V.; Prysiazhnyi, Yu.; Reutskyy, V.; Mosiuk, M. Epoxide of Rapeseed Oil-Modifier for Bitumen and Asphalt Concrete. Pet. Coal 2019, 61, 836-842.
[3] Wręczycki, J.; Demchuk, Y.; Bieliński, D.; Bratychak, M.; Gunka, V.; Anyszka, R.; Gozdek, T. Bitumen Binders Modified with Sulfur/Organic Copolymers. Materials 2022, 15, 1774. https://doi.org/10.3390/ma15051774
https://doi.org/10.3390/ma15051774
[4] Grynyshyn, O.; Donchenko, M.; Khlibyshyn, Yu.; Poliak, O. Investigation of Petroleum Bitumen Resistance to Aging. Chem. Chem. Technol. 2021, 15, 438-442. https://doi.org/10.23939/chcht15.03.438
https://doi.org/10.23939/chcht15.03.438
[5] Nagurskyy, A.; Khlibyshyn, Y.; Grynyshyn, O. Bitumen Compositions for Cold Applied Roofing Products. Chem. Chem. Technol. 2017, 11, 226-229. https://doi.org/10.23939/chcht11.02.226
https://doi.org/10.23939/chcht11.02.226
[6] Nizamuddin, S.; Boom, Y. J.; Giustozzi, F. Sustainable Polymers from Recycled Waste Plastics and their Virgin Counterparts as Bitumen Modifiers: A Comprehensive Review. Polymers 2021, 13, 3242. https://doi.org/10.3390/polym13193242
https://doi.org/10.3390/polym13193242
[7] Pstrowska, K.; Gunka, V.; Prysiazhnyi, Y., Demchuk, Y.; Hrynchuk, Y.; Sidun, I.; Bratychak, M. Obtaining of Formaldehyde Modified Tars and Road Materials on Their Basis. Materials 2022, 15, 5693. https://doi.org/10.3390/ma15165693
https://doi.org/10.3390/ma15165693
[8] Gunka, V.; Demchuk, Y.; Sidun, I.; Kochubei, V.; Shved, M.; Romanchuk, V.; Korchak, B. Chemical Modification of Road Oil Bitumens by Formaldehyde. Pet. Coal 2020, 62, 420-429.
[9] Demchuk, Y.; Sidun, I.; Gunka, V.; Pyshyev, S.; Solodkyy, S. Effect of Phenol-Cresol-Formaldehyde Resin on Adhesive and Physico-Mechanical Properties of Road Bitumen. Chem. Chem. Technol. 2018, 12, 456-461. https://doi.org/10.23939/chcht12.04.456
https://doi.org/10.23939/chcht12.04.456
[10] Bratychak, M.; Gunka, V.; Prysiazhnyi, Y.; Hrynchuk, Y.; Sidun, I.; Demchuk, Y.; Shyshchak, O. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 1. Effect of Solvent Nature on the Properties of Petroleum Residues Modified with Folmaldehyde. Chem. Chem. Technol. 2021, 15, 274-283. https://doi.org/10.23939/chcht15.02.274
https://doi.org/10.23939/chcht15.02.274
[11] Geckil, T.; Seloglu, M. Performance Properties Of Asphalt Modified With Reactive Terpolymer. Constr. Build. Mater. 2018, 173, 262-271. https://doi.org/10.1016/j.conbuildmat.2018.04.036
https://doi.org/10.1016/j.conbuildmat.2018.04.036
[12] Kumandaş, A.; Çavdar, E.; Oruç, Ş.; Pancar, E. B.; Kök, B. V. Effect of WCO Addition on High and Low-Temperature Performance of RET Modified Bitumen. Constr. Build. Mater. 2022, 323, 126561. https://doi.org/10.1016/j.conbuildmat.2022.126561
https://doi.org/10.1016/j.conbuildmat.2022.126561
[13] Starchevskyy, V.; Hrynchuk, Y.; Matcipura, P.; Reutskyy, V. Influence Of Initiators On The Adhesion Properties Of Bitumen Modified By Natural Origin Epoxide. Chem. Chem. Technol. 2021, 15, 142-147. https://doi.org/10.23939/chcht15.01.142
https://doi.org/10.23939/chcht15.01.142
[14] Chopra, A.; Singh, S. Performance Evaluation on Epoxy Modified Bituminous Mix. Materials Today: Proceedings 2022, 51, 1197-1200. https://doi.org/10.1016/j.matpr.2021.07.206
https://doi.org/10.1016/j.matpr.2021.07.206
[15] Ivashkiv, O.; Astakhova, O.; Shyshchak, O.; Plonska-Brzezinska, M.; Bratychak, M. Structure And Application of ED-20 Epoxy Resin Hydroxy-Containing Derivatives in Bitumen-Polymeric Blends. Chem. Chem. Technol. 2015, 9, 69-76. https://doi.org/10.23939/chcht09.01.069
https://doi.org/10.23939/chcht09.01.069
[16] Çubuk, M.; Gürü, M.; Çubuk, M. K. Improvement of Bitumen Performance with Epoxy Resin. Fuel 2009, 88, 1324-1328. https://doi.org/10.1016/j.fuel.2008.12.024
https://doi.org/10.1016/j.fuel.2008.12.024
[17] Xia, Q.; Li, Y.; Xu, H.; Luo, H.; Zheng, Y.; Zhao, R.; Xu, H. Using Phenol Formaldehyde Resin, Hexamethylenetetramine and Matrix Asphalt to Synthesize Hard-Grade Asphalts for High-Modulus Asphalt Concrete. Sustainability 2022, 14, 15689. https://doi.org/10.3390/su142315689
https://doi.org/10.3390/su142315689
[18] Zhang, H.; Su, C.; Bu, X.; Zhang, Y.; Gao, Y.; Huang, M. Laboratory investigation on the properties of polyurethane/unsaturated polyester resin modified bituminous mixture. Constr. Build. Mater. 2020, 260, 119865. https://doi.org/10.1016/j.conbuildmat.2020.119865
https://doi.org/10.1016/j.conbuildmat.2020.119865
[19] Shi, X.; Zhang, H.; Bu, X.; Zhang, G.; Zhang, H.; Kang, H. Performance Evaluation of BDM/Unsaturated Polyester Resin-Modified Asphalt Mixture for Application in Bridge Deck Pavement. Road Mater. Pavement Des. 2022, 23, 684-700. https://doi.org/10.1080/14680629.2020.1828154
https://doi.org/10.1080/14680629.2020.1828154
[20] Çubuk, M.; Gürü, M.; Çubuk, M.K.; Arslan, D. Rheological Properties and Performance Evaluation of Phenol Formaldehyde Modified Bitumen. J. Mater. Civ. Eng. 2014, 26. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000889
https://doi.org/10.1061/(ASCE)MT.1943-5533.0000889
[21] Gupta, A.; Chopra, E. A. Comparative Study of Conventional and Bakelite Modified Bituminious Mix. Int. J. Civ. Eng. Technol. 2019, 10, 1386-1392. https://ssrn.com/abstract=3457096
[22] Saha, S.K.; Suman, S.K. Characterization of Bakelite-Modified Bitumen. Innov. Infrastruct. Solut. 2017, 2, 3. https://doi.org/10.1007/s41062-017-0052-0
https://doi.org/10.1007/s41062-017-0052-0
[23] Gunka, V.; Prysiazhnyi, Y.; Hrynchuk, Y.; Sidun, I.; Demchuk, Y.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 3. Tar Modified with Formaldehyde. Chem. Chem. Technol. 2021, 15, 608-620. https://doi.org/10.23939/chcht15.04.608
https://doi.org/10.23939/chcht15.04.608
[24] Gunka, V.; Bilushchak, H.; Prysiazhnyi, Y.; Demchuk, Y.; Hrynchuk, Y.; Sidun, I.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 4. Determining the Optimal Conditions for Tar Modification with Formaldehyde and Properties of the Modified Products. Chem. Chem. Technol. 2022, 16, 142-149. https://doi.org/10.23939/chcht16.01.142
https://doi.org/10.23939/chcht16.01.142
[25] Gunka, V.; Demchuk, Y.; Pyshyev, S.; Anatolii, S.; Lypko, Y. The Selection of Raw Materials for the Production of Road Bitumen Modified by Phenol-Cresol-Formaldehyde Resins. Pet. Coal. 2018, 60, 1199-1206.
[26] Demchuk, Y.; Gunka, V.; Sidun, I.; Solodkyy, S. Comparison of Bitumen Modified by Phenol Formaldehyde Resins Synthesized from Different Raw Materials. In International Scientific Conference EcoComfort and Current Issues of Civil Engineering; Springer, Cham., 2020; pp. 95-102. https://doi.org/10.1007/978-3-030-57340-9_12
https://doi.org/10.1007/978-3-030-57340-9_12
[27] Pyshyev, S.; Demchuk, Y.; Poliuzhyn, I.; Kochubei, V. Obtaining and Use Adhesive Promoters to Bitumen from the Phenolic Fraction of Coal Tar. Int J Adhes Adhes. 2022, 118, 103191. https://doi.org/10.1016/j.ijadhadh.2022.103191
https://doi.org/10.1016/j.ijadhadh.2022.103191
[28] Gunka, V.; Demchuk, Y.; Sidun, I.; Miroshnichenko, D.; Nyakuma, B.B.; Pyshyev, S. Application of Phenol-Cresol-Formaldehyde Resin as an Adhesion Promoter for Bitumen and Asphalt Concrete. Road Mater. Pavement Des. 2020, 22, 2906-2918. https://doi.org/10.1080/14680629.2020.1808518
https://doi.org/10.1080/14680629.2020.1808518
[29] EN 1426:2015, Bitumen and bituminous binders. Determination of needle penetration, 2015.
[30] EN 1427:2015, Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method, 2015.
[31] EN 12596:2018, Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary, 2018.
[32] EN 12595:2018, Bitumen and bituminous binders. Determination of kinematic viscosity, 2018.
[33] EN 12592:2018, Bitumen and bituminous binders. Determination of solubility, 2018.
[34] DSTU 8787:2018 (National Standard of Ukraine), Bitumen and bituminous binders. Determination of adhesion with crushed stone, 2018.
[35] EN 12593, Bitumen and bituminous binders. Determination of the Fraass breaking point, 2015.
[36] EN 12591, Bitumen and bituminous binders. Specifications for paving grade bitumens, 2009.
[37] Knop A., Scheib W. Chemistry and Application of Phenolic Resins. Springer-Verlag: Berlin, Heidelberg, New York, 1979.
https://doi.org/10.1007/978-3-662-11309-7
[38] Bratychak, M.M.; Getmanchuk, Y.P. Khimichna tekhnolohiya syntezu vysokomolekulyarnykh spoluk; Lvivska politekhnyka: Lviv, 2009.
[39] Parker, F.S. Applications of Infrared Spectroscopy in Biochemistry, Biology, and Medicine; Springer: New York, 1971.
https://doi.org/10.1007/978-1-4684-1872-9
Current Issues
The journal is accepted into Emerging Sources Citation Index (ESCI) - new index in the Web of Science™ Core Collection
The journal is indexed in the international scientometric databases:
