Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 5. Use of Maleic Anhydride for Foaming Bitumens
Affiliation:
1 Lviv Polytechnic National University
12 S.Bandery St., Lviv 79013, Ukraine;
mbratychak@gmail.com
DOI:
https://doi.org/10.23939/chcht16.02.295
| Attachment | Size |
|---|---|
 full_text.pdf | 312.24 KB |
Abstract:
The possibility of using maleic anhydride as a foaming agent to produce foamed bitumen was investigated. The optimal content of maleic anhydride was determined according to the indicators of the growth of the binder volume and the half-life of the foam. With use of maleic anhydride as a foaming agent, foamed bitumen was obtained, and later was used to obtain two samples of stone mastic asphalt, which differed in mixing and compaction temperatures of stone mastic asphalt mix. For comparison, the composition of stone mastic asphalt mix was designed using non-foamed (BND 70/100 and BND 70/100 modified with maleic anhydride) and foamed bitumen (BND 70/100 foamed with maleic anhydride at two different temperatures). Stone mastic asphalt specimens were formed and tested
References:
[1] Sukhhija, M.; Saboo, N.A comprehensive Review of Warm Mix Asphalt Mixtures-Laboratory to Field. Constr. Build. Mater. 2021, 274, 121781. https://doi.org/10.1016/j.conbuildmat.2020.121781
https://doi.org/10.1016/j.conbuildmat.2020.121781
[2] Kim, Y.; Lee, J.; Baek, C.; Yang, S.; Kwon, S.; Suh, Y. Performance Evaluation of Warm-And Hot-Mix Asphalt Mixtures Based on Laboratory and Accelerated Pavement Tests. Adv. Mater. Sci. Eng. 2012, 2012, 1-9. https://doi.org/10.1155/2012/901658
https://doi.org/10.1155/2012/901658
[3] Rondón-Quintana, H. A.; Hernández-Noguera, J. A.; Reyes-Lizcano, F. A. A Review of Warm Mix Asphalt Technology: Technical, Economical and Environmental Aspects. Ing. eInvestig. 2015, 35, 5-18. https://doi.org/10.15446/ing.investig.v35n3.50463
https://doi.org/10.15446/ing.investig.v35n3.50463
[4] Rathore, M.; Haritonovs, V.; Zaumanis, M. Performance Evaluation of Warm Asphalt Mixtures Containing Chemical Additive and Effect of Incorporating High Reclaimed Asphalt Content. Materials2021, 14, 3793. https://doi.org/10.3390/ma14143793
https://doi.org/10.3390/ma14143793
[5] Rubio, M. C.; Martínez, G.; Baena, L.; Moreno, F. Warm Mix Asphalt: An Overview. J. Clean. Prod. 2012, 24, 76-84. https://doi.org/10.1016/j.jclepro.2011.11.053
https://doi.org/10.1016/j.jclepro.2011.11.053
[6] Abreu, L.; Oliveira, J.; Silva, H.; Silva, C.; Palha, D.; Fonseca, P. Foamed Bitumen: An Alternative Way of Producing Asphalt Mixtures. Cienc. e Tecnol. dos Mater. 2017, 29(1), 198-203. https://doi.org/10.1016/j.ctmat.2016.07.004
https://doi.org/10.1016/j.ctmat.2016.07.004
[7] Ali, A.; Abbas, A.; Nazzal, M.; Alhassan, A.; Roy, A.; Powers, D. Effect of Temperature Reduction, Foaming Water Content, and Aggregate Moisture Content on Performance of Foamed Warm Mix Asphalt. Constr. Build. Mater. 2013, 48, 1058-1066. https://doi.org/10.1016/j.conbuildmat.2013.07.081
https://doi.org/10.1016/j.conbuildmat.2013.07.081
[8] Abdullah, M.E., Ahmad Zamhari, K., Buhari, R., Abu Bakar, S.K., MohdKamaruddin, N.H., Nayan, N., Hainin, M.R., Abdul Hassan, N., Hassan, S.A., Md. Yusoff, N.I. Warm Mix Asphalt Technology: A Review. J. Teknol. 2014, 71, 1-14. https://doi.org/10.11113/jt.v71.3757
https://doi.org/10.11113/jt.v71.3757
[9] Cheraghian, G.; Falchetto, A. C.; You, Z.; Chen, S.; Kim, Y. S.; Westerhoff, J.; Moon K. H.; Wistuba, M. P. Warm Mix Asphalt Technology: An up to Date Review. J. Clean. Prod.2020, 268, 122128. https://doi.org/10.1016/j.jclepro.2020.122128
https://doi.org/10.1016/j.jclepro.2020.122128
[10] Caputo, P.; Abe, A.A.; Loise, V.; Porto, M.; Calandra, P.; Angelico, R.; Oliviero Rossi, C. The Role of Additives in Warm Mix Asphalt Technology: An Insight into their Mechanisms of Improving an Emerging Technology. Nanomaterials2020, 10, 1202. https://doi.org/10.3390/nano10061202
https://doi.org/10.3390/nano10061202
[11] Kheradmand, B.; Muniandy, R.; Hua, L.T.; Yunus, R.B.; Solouki, A. An Overview of the Emerging Warm Mix Asphalt Technology. Int. J. Pavement Eng. 2014, 15, 79-94. https://doi.org/10.1080/10298436.2013.839791
https://doi.org/10.1080/10298436.2013.839791
[12] Zaumanis, M.; Haritonovs, V.; Brencis, G.; Smirnovs, J. Assessing the Potential and Possibilities for the Use of Warm Mix Asphalt in Latvia. Constr. Sci. 2012, 13, 53-59. https://doi.org/10.2478/v10311-012-0008-8
https://doi.org/10.2478/v10311-012-0008-8
[13] Polacco, G.; Berlincioni, S.; Biondi, D.; Stastna, J.; Zanzotto, L. Asphalt Modification with Different Polyethylene-Based Polymers. Eur. Polym. J. 2005, 41, 2831-2844. https://doi.org/10.1016/j.eurpolymj.2005.05.034
https://doi.org/10.1016/j.eurpolymj.2005.05.034
[14] Giavarini, C.; De Filippis, P.; Santarelli, M.L.; Scarsella, M. Production of Stable Polypropylene-Modified Bitumens. Fuel1996, 75, 681-686. https://doi.org/10.1016/0016-2361(95)00312-6
https://doi.org/10.1016/0016-2361(95)00312-6
[15] Sengoz, B.; Topal, A.; Isikyakar, G. Morphology and Image Analysis of Polymer Modified Bitumens. Constr. Build. Mater. 2009, 23, 1986-1992. https://doi.org/10.1016/j.conbuildmat.2008.08.020
https://doi.org/10.1016/j.conbuildmat.2008.08.020
[16] Becker, M.Y.; Muller, A.J.; Rodriguez, Y. Use of Rheological Compatibility Criteria to Study SBS Modified Asphalts. J. Appl.Polym. Sci. 2003, 90, 1772-1782. https://doi.org/10.1002/app.12764
https://doi.org/10.1002/app.12764
[17] Gunka, V.; Demchuk, Y.; Sidun, I.; Miroshnichenko, D.; Nyakuma, B.B.; Pyshyev, S. Application of Phenol-Cresol-Formaldehyde Resin as an Adhesion Promoter for Bitumen and Asphalt Concrete. Road Mater. Pavement Des. 2021, 22, 2906-2918. https://doi.org/10.1080/14680629.2020.1808518
https://doi.org/10.1080/14680629.2020.1808518
[18] Gunka V.; Demchuk Yu.; Pyshyev S.; Starovoit A.; Lypko Y. The Selection of Raw Materials for the Production of Road Bitumen Modified by Phenol-Cresol-Formaldehyde Resins. Pet. Coal2018, 60 (6), 1199-1206.
[19] Demchuk, Y.; Gunka, V.; Pyshyev, S.; Sidun, I.; Hrynchuk, Y.; Kucinska-Lipka, J.; Bratychak, M. Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin. Chem. Chem. Technol. 2020, 14, 251-256. https://doi.org/10.23939/chcht14.02.251
https://doi.org/10.23939/chcht14.02.251
[20] Demchuk, Y.; Gunka, V.; Sidun, I.; Solodkyy, S. Comparison of Bitumen Modified by Phenol Formaldehyde Resins Synthesized from Different Raw Materials. In Proceedings of EcoComfort 2020; Blikharskyy, Z., Ed.;Springer,2020;pp 95-102.https://doi.org/10.1007/978-3-030-57340-9_12
https://doi.org/10.1007/978-3-030-57340-9_12
[21] Strap, G.; Astakhova, O.; Lazorko, O.; Shyshchak, O.; Bratychak, M. Modified Phenol-Formaldehyde Resins and their Application in Bitumen-Polymeric Mixtures. Chem. Chem. Technol. 2013, 7, 279-287. https://doi.org/10.23939/chcht07.03.279
https://doi.org/10.23939/chcht07.03.279
[22] Bratychak, M.; Grynyshyn, O.; Astakhova, O.; Shyshchak, O.; Wacławek, W. Functional Petroleum Resins Based on Pyrolysis By-Products and their Application for Bitumen Modification. Ecol. Chem. Eng.S2010, 17, 309-315.
[23] Wręczycki, J.; Demchuk, Y.; Bieliński, D. M.; Bratychak, M.; Gunka, V.; Anyszka, R.; Gozdek, T. Bitumen Binders Modified with Sulfur/Organic Copolymers. Materials2022, 15, 1774. https://doi.org/10.3390/ma15051774
https://doi.org/10.3390/ma15051774
[24] Jasso, M.; Hampl, R.; Vacin, O.; Bakos, D.; Stastna, J.; Zanzotto, L. Rheology of Conventional Asphalt Modified with SBS, Elvaloy and Polyphosphoric Acid. Fuel Process. Technol. 2015, 140, 172-179. https://doi.org/10.1016/j.fuproc.2015.09.002
https://doi.org/10.1016/j.fuproc.2015.09.002
[25] Ortega, F.J.; Navarro, F.J.; García-Morales, M. Dodecylbenzenesulfonic Acid as a Bitumen Modifier: A Novel Approach to Enhance Rheological Properties of Bitumen. Energy Fuels2017, 31, 5003-5010. https://doi.org/10.1021/acs.energyfuels.7b00419
https://doi.org/10.1021/acs.energyfuels.7b00419
[26] Peng, C.; Chen, P.; You, Z.; Lv, S.; Zhang, R.; Xu, F.; Zhang, H.;Chen, H. Effect of Silane Coupling Agent on Improving the Adhesive Properties between Asphalt Binder and Aggregates. Constr. Build. Mater. 2018, 169, 591-600. https://doi.org/10.1016/j.conbuildmat.2018.02.186
https://doi.org/10.1016/j.conbuildmat.2018.02.186
[27] Cuadri, A.A.; Partal, P.; Navarro, F.J.; García-Morales, M.; Gallegos, C. Bitumen Chemical Modification by Thiourea Dioxide. Fuel2011, 90, 2294-2300. https://doi.org/10.1016/j.fuel.2011.02.035
https://doi.org/10.1016/j.fuel.2011.02.035
[28] Gunka, V.; Demchuk, Y.; Sidun, I.; Kochubei, V.; Shved. M.; Romanchuk, V.; Korchak, B. Chemical Modification of Road Oil Bitumens by Formaldehyde. Pet. Coal2020, 62, 420-429.
[29] Bratychak, M.; Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 1. Effect of Solvent Nature on the Properties of Petroleum Residues Modified with Folmaldehyde. Chem. Chem. Technol. 2021, 15, 274-283. https://doi.org/10.23939/chcht15.02.274
https://doi.org/10.23939/chcht15.02.274
[30] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 2. Bitumen Modified with Maleic Anhydride. Chem. Chem. Technol. 2021, 15, 443-449. https://doi.org/10.23939/chcht15.03.443
https://doi.org/10.23939/chcht15.03.443
[31] Gunka, V.; Prysiazhnyi, Yu.; Hrynchuk, Yu.; Sidun, I.; Demchuk, Yu.; Shyshchak, O.; Poliak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues. 3. Tar Modified with Formaldehyde. Chem. Chem. Technol. 2021, 15, 608-620. https://doi.org/10.23939/chcht15.04.608
https://doi.org/10.23939/chcht15.04.608
[32] Gunka, V.; Bilushchak, H.; Prysiazhnyi, Yu.; Demchuk, Yu.; Hrynchuk, Yu.; Sidun, I.; Shyshchak, O.; Bratychak, M. Production of Bitumen Modified with Low-Molecular Organic Compounds from Petroleum Residues.4. Determining the Optimal Conditions for Tar Modification with Formaldehyde and Properties of the Modified Products. Chem. Chem. Technol. 2022, 16, 142-149. https://doi.org/10.23939/chcht16.01.142
https://doi.org/10.23939/chcht16.01.142
[33 Zheltobriukh, A.; Malii, P.; Odehova, T.; Tymoshchuk, O. Using Asphalt Mixtures Based on Foamed Bitumen. Dorogi і mosti2019, 19-20, 94-106. https://doi.org/10.36100/dorogimosti2019.19.094
https://doi.org/10.36100/dorogimosti2019.19.094
[34] http://online.budstandart.com/ua/catalog/doc-page?id_doc=80850
[35] Herrington, P.R.; Wu, Y.; Forbes, M.C. Rheological Modification of Bitumen with Maleic Anhydride and Dicarboxylic Acids. Fuel1999, 78, 101-110. https://doi.org/10.1016/S0016-2361(98)00120-3
https://doi.org/10.1016/S0016-2361(98)00120-3
[36] Kang, Y.; Wang, F.; Chen, Z. Reaction of Asphalt and Maleic Anhydride: Kinetics and Mechanism. Chem. Eng. J. 2010, 164, 230-237. https://doi.org/10.1016/j.cej.2010.08.020
https://doi.org/10.1016/j.cej.2010.08.020
Current Issues
The journal is accepted into Emerging Sources Citation Index (ESCI) - new index in the Web of Science™ Core Collection
The journal is indexed in the international scientometric databases:
