The Use of Mussel Shell as a Bio-Additive for Poly(Lactic Acid) Based Green Composites
Affiliation:
1 Chemistry Dept., Izmir Institute of Technology, Izmir, Turkey
2 Chemistry Dept., Karabuk University, Karabuk, Turkey
3 Inovasens Ltd.,Izmir Technopark, Izmir, Turkey
umit.tayfun@inovasens.com
DOI:
https://doi.org/10.23939/chcht15.04.621
| Attachment | Size |
|---|---|
 full_text.pdf | 921.69 KB |
Abstract:
Mussel shell is one of the most hazardous aquaculture wastes and its powder was used as an additive for bio-degradable poly (lactic acid) in this current study. Bio-composites were fabricated via conventional melt mixing technique followed by an injection moulding process. The effects of mussel shell powder inclusion on mechanical, melt-flow, water uptake and morphological performance of poly (lactic acid)-based green composites were reported.
References:
[1] Mazumdar S.: Composites Manufacturing Materials, Product, and Process Engineering. CRC Press LLC, Boca Raton 2002.
https://doi.org/10.1201/9781420041989
[2] Akovali G.: Handbook of Composite Fabrication. Rapra Technology, Shawbury 2001.
[3] Sabu T., Kuruvilla J., Malhotra S. et al.: Polymer Composites. Wiley VCH 2012.
[4] Katz H., Milewsky J.: Handbook of Fillers for Plastics, Van Nostrand Reinhold 1987.
[5] Gächter R., Müller H.: Plastics Additives. Hanser Verlag 1990.
https://doi.org/10.1016/0306-3747(90)90240-3
[6] Xanthos M.: Functional Fillers for Plastics. Wiley VCH 2005.
https://doi.org/10.1002/3527605096
[7] Mohanty A., Misra M., Drzal L.: J. Polym. Environ., 2002, 10, 19. https://doi.org/10.1023/A:1021013921916
https://doi.org/10.1023/A:1021013921916
[8] Emadian M., Onay T., Demirel B.: Waste Manag., 2017, 59, 526. https://doi.org/10.1016/j.wasman.2016.10.006
https://doi.org/10.1016/j.wasman.2016.10.006
[9] Bajpai P., Ahmad F., Chaudhary V.: Processing and Characterization of Bio-Composites [in:] Martínez L., Kharissova O., Kharisov B. (Eds.), Handbook of Ecomaterials. Springer 2017. https://doi.org/10.1007/978-3-319-48281-1_98-1
https://doi.org/10.1007/978-3-319-48281-1_98-1
[10] Falinski M., Plata D., Chopra S. et al.: Nature Nanotech., 2018, 13, 708. https://doi.org/10.1038/s41565-018-0120-4
https://doi.org/10.1038/s41565-018-0120-4
[11] Dicker M., Duckworth P., Baker A. et al.: Compos. Part A-Appl. S., 2014, 56, 280.
https://doi.org/10.1016/j.compositesa.2013.10.014
https://doi.org/10.1016/j.compositesa.2013.10.014
https://doi.org/10.1016/j.compositesa.2013.10.014
[12] Saba N., Jawaid M., Sultan M., et al.: Green Biocomposites for Structural Applications [in:] Jawaid M., Salit M., Alothman O. (Eds.), Green Biocomposites. Green Energy and Technology. Springer 2017. https://doi.org/10.1007/978-3-319-49382-4_1
https://doi.org/10.1007/978-3-319-49382-4_1
[13] Faruk O., Bledzki A., Fink H. et al.: Macromol. Mater. Eng., 2014, 299, 9. https://doi.org/10.1002/mame.201300008
https://doi.org/10.1002/mame.201300008
[14] Koronis G., Silva A., Fontul M.: Compos. Part B-Eng., 2013, 44, 120. https://doi.org/10.1016/j.compositesb.2012.07.004
https://doi.org/10.1016/j.compositesb.2012.07.004
[15] Akampumuza O., Wambua P., Ahmed A., et al.: Polym. Compos., 2017, 38, 2553. https://doi.org/10.1002/pc.23847
https://doi.org/10.1002/pc.23847
[16] Ghanbarzadeh B., Almasi H.: Biodegradable Polymers. Intech 2013.
https://doi.org/10.5772/56230
[17] Rasal R., Janorkar A., Hirt D.: Prog. Polym. Sci., 2010, 35, 338. https://doi.org/10.1016/j.progpolymsci.2009.12.003
https://doi.org/10.1016/j.progpolymsci.2009.12.003
[18] Siakeng R., Jawaid M., Ariffin H. et al.: Polym. Compos., 2019, 40, 446. https://doi.org/10.1002/pc.24747
https://doi.org/10.1002/pc.24747
[19] Ren J.: Biodegradable Poly(lactic acid): Synthesis, Modification, Processing and Applications, Springer-Verlag 2011.
https://doi.org/10.1007/978-3-642-17596-1
[20] Tayfun U., Dogan M.: Polym. Bull., 2016, 73, 1581. https://doi.org/10.1007/s00289-015-1564-4
https://doi.org/10.1007/s00289-015-1564-4
[21] Bajpai P., Singh I., Madaan J.: J. Thermoplast. Compos. Mater., 2012, 27, 52. https://doi.org/10.1177/0892705712439571
https://doi.org/10.1177/0892705712439571
[22] Mo K., Alengaram U., Jumaat M. el al.: Construct. Build. Mater., 2018, 162, 751. https://doi.org/10.1016/j.conbuildmat.2017.12.009
https://doi.org/10.1016/j.conbuildmat.2017.12.009
[23] Yao Z., Xia M., Li H. et al.: Crit. Rev. Environ. Sci.Technol., 2014, 44, 2502. https://doi.org/10.1080/10643389.2013.829763
https://doi.org/10.1080/10643389.2013.829763
[24] Yoon G.-L., Kim B.-T., Kim B.-O. et al.: Waste Manag., 2003, 23, 825. https://doi.org/10.1016/S0956-053X(02)00159-9
https://doi.org/10.1016/S0956-053X(02)00159-9
[25] Funabashi M., Ninomiya F., Flores E. et al.: J. Polym. Environ., 2010, 18, 85. https://doi.org/10.1007/s10924-010-0166-3
https://doi.org/10.1007/s10924-010-0166-3
[26] Lee C., Lee D., Ali M. et al.: Waste Manag., 2008, 28, 2702. https://doi.org/10.1016/j.wasman.2007.12.005
https://doi.org/10.1016/j.wasman.2007.12.005
[27] Yang E., Kim M., Park H. et al.: Construct. Build. Mater., 2010, 24, 758. https://doi.org/10.1016/j.conbuildmat.2009.10.032
https://doi.org/10.1016/j.conbuildmat.2009.10.032
[28] Chong M., Chun B., Chung Y. et al.: J. Appl. Polym. Sci., 2006, 99, 1583. https://doi.org/10.1002/app.22484
https://doi.org/10.1002/app.22484
[29] Yao Z., Xia M., Ge L. et al.: Fibers Polym. 2014, 5, 1278. https://doi.org/10.1007/s12221-014-1278-5
https://doi.org/10.1007/s12221-014-1278-5
[30] Li H., Tan Y., Zhang L., et al.: J. Inorg. Mater., 2012, 27, 977. https://doi.org/10.3724/SP.J.1077.2012.11653
https://doi.org/10.3724/SP.J.1077.2012.11653
[31] Xia M., Yao Z., Ge L. et al.: J. Compos. Mater., 2015, 49, 807. https://doi.org/10.1177/0021998314525981
https://doi.org/10.1177/0021998314525981
[32] Li H., Tan Y., Zhang L. et al.: J. Hazard. Mater., 2012, 217, 256. https://doi.org/10.1016/j.jhazmat.2012.03.028
https://doi.org/10.1016/j.jhazmat.2012.03.028
[33] Kocaman S., Ahmetli G., Cerit A., et al.: Int. J. Metall. Mater. Eng., 2016, 10, 438. https://doi.org/10.5281/zenodo.1123921
[34] Marin F., Le R., Marie B.: Front. Biosci., 2012, 4, 125. https://doi.org/10.2741/321
https://doi.org/10.2741/321
[35] Hamester M., Balzer P., Becker D.: Mater. Res., 2012, 15, 204. https://doi.org/10.1590/S1516-14392012005000014
https://doi.org/10.1590/S1516-14392012005000014
[36] Kalia S., Avérous L.: Biodegradable and Biobased Polymers for Environmental and Biomedical Applications. John Wiley & Sons 2016.
https://doi.org/10.1002/9781119117360
[37] Yang Y., Zhang L., Xiong Z. et al.: Sci. China Chem., 2016, 59, 1355. https://doi.org/10.1007/s11426-016-0222-7
https://doi.org/10.1007/s11426-016-0222-7
[38] Kasuga T., Maeda H., Kato K. et al.: Biomater., 2003, 24, 3247. https://doi.org/10.1016/S0142-9612(03)00190-X
https://doi.org/10.1016/S0142-9612(03)00190-X
[39] Flahiff C., Blackwell A., Hollis J. et al.: J. Biomed. Mater. Res., 1998, 32, 419. https://doi.org/10.1002/(SICI)1097-4636(199611)32:3<419::AID-JBM15>3.0.CO;2-B
https://doi.org/10.1002/(SICI)1097-4636(199611)32:3<419::AID-JBM15>3.0.CO;2-B
[40] Kanbur Y., Tayfun U.: J. Elastom. Plast., 2019, 51, 262. https://doi.org/10.1177/0095244318796616
https://doi.org/10.1177/0095244318796616
[41] Lee J., Hong J., Ahn K.: Polym. Compos., 2019, 40, 4023. https://doi.org/10.1002/pc.25263
https://doi.org/10.1002/pc.25263
[42] Alghadi A., Tirkes S., Tayfun U.: Mater. Res. Express, 2020, 7, 015301. https://doi.org/10.1088/2053-1591/ab551b
https://doi.org/10.1088/2053-1591/ab551b
[43] Fu S., Feng X., Lauke B. et al.: Compos. Part B-Eng., 2008, 39, 933. https://doi.org/10.1016/j.compositesb.2008.01.002
https://doi.org/10.1016/j.compositesb.2008.01.002
[44] Dike A., Tayfun U., Dogan M.: Fire Mater., 2017, 41, 890. https://doi.org/10.1002/fam.2428
https://doi.org/10.1002/fam.2428
[45] Avolio R., Castaldo R., Avella M. et al.: Compos. Part B-Eng., 2018, 152, 267. https://doi.org/10.1016/j.compositesb.2018.07.011
https://doi.org/10.1016/j.compositesb.2018.07.011
[46] Eselini N., Tirkes S., Akar A., et al.: J. Elastom. Plast., 2020, 52, 701. https://doi.org/10.1177/0095244319884716
https://doi.org/10.1177/0095244319884716
[47] Bratychak M., Astakhova O., Shyshchak O. et al.: Chem. Chem. Technol., 2019, 13, 360.
https://doi.org/10.23939/chcht13.03.360
https://doi.org/10.23939/chcht13.03.360
[48] Tayfun U., Dogan M., Bayramli E.: Polym. Compos., 2017, 38, 2874. https://doi.org/10.1002/pc.23889
https://doi.org/10.1002/pc.23889
[49] Kilinc K., Kanbur Y., Tayfun U.: Holzforschung, 2019, 73, 401. https://doi.org/10.1515/hf-2018-0116
https://doi.org/10.1515/hf-2018-0116
Current Issues
The journal is accepted into Emerging Sources Citation Index (ESCI) - new index in the Web of Science™ Core Collection
The journal is indexed in the international scientometric databases:
