Hydrochloric and Orthophosphoric Acids Use in the Quick-Traffic Slurry Surfacing Mix
Affiliation:
1 Institute of Building and Environmental Engineering,
Lviv Polytechnic National University,
12, Bandera St., 79013 Lviv, Ukraine
2 Private Enterprise “Laboratory WestRoadServices”,
5a, Naukova St., 79003 Lviv, Ukraine
3 Institute of Chemistry and Chemical Technologies,
Lviv Polytechnic National University,
12, Bandera St., 79013 Lviv, Ukraine
4 O.M. Beketov National University of Urban Economy in Kharkiv,
17, Marshal Bazhanov St., 61002 Kharkiv, Ukraine
siduniurii@gmail.com
DOI:
https://doi.org/10.23939/chcht14.03.380
| Attachment | Size |
|---|---|
 full_text.pdf | 599.99 KB |
Abstract:
This article is devoted to development and production (on a lab emulsion plant) of six compositions of slow-setting bitumen emulsions for a slurry-surfacing mix. An aggregate composition for Type 1 (0–5 mm) and Type 3 (0–15 mm) slurry-surfacing mixes was determined and selected. Results of the slurry surfacing mix composition selected by the criteria of a mixture decay, cohesion strength build-up rate and material loss by wet track abrasion testing – on the basis of bitumen emulsions produced from both distilled and oxidized bitumen, using various emulsifiers and both hydrochloric and orthophosphoric acids, are presented in the article. Advantages of using slurry-surfacing mixes based on emulsion produced with orthophosphoric acid and Redicote C-320Е emulsifier were proved. Such a system either minimizes or eliminates in its composition the use of the mixture decomposition regulator and reduces the content of Portland cement. The application of such a system makes it possible to produce slurry surfacing mix on the basis of low acid oxidized bitumen made from light petroleum and rock material through the criterion of the total surface activity determined by methylene blue with high rates of mix curing, and consequently the transport rapid start on the arranged thin-layer coating. Besides, the wet track abrasion indices of this system are substantially lower than in traditional system on oxidized bitumen, and even lower in comparison with the system on distilled bitumen.
References:
[1] Solomentsev A., Zhdanyuk V., Malyar V., Krut’ V.: Khim. Technol. Topliv i Masel, 1999, 35, 285.
[2] Sobol K., Blikharskyy Z., Petrovska N., Terlyha V.: Chem. Chem. Technol., 2014, 8, 461. https://doi.org/10.23939/chcht08.04.461
[3] Solodkyy S., Kahanov V., Hornikovska I., Turba Y.: East. Eur. J. Enterpr. Technol., 2015, 4, 40.
[4] Solodkyy S., Markiv T., Sobol K., Hunyak O.: MATEC Web of Conferences, Transbud, 2017, 116. https://doi.org/10.1051/matecconf/201711601016
[5] Broughton B., Lee S.-J., Kim Y.-J.: Int. Scholarly Res. Not., 2012, 2012. https://doi.org/10.5402/2012/279643
[6] Kelvin Z., Mukendi K. Kalambayi. Civil Eng. J., 2018, 4, 2242. https://doi.org/10.28991/cej-03091154
[7] Pyshyev S., Grytsenko Y., Solodkyy S. et al.: Chem. Chem. Technol., 2015, 9, 359. https://doi.org/10.23939/chcht09.03.359
[8] Zhi Х., Wang W., Tsai Y.: J. Central South Univ., 2012, 19, 2394.
[9] Nebrada Rodrigo F., Santos J.: Carreteras, 2005, 139, 78.
[10] Pyshyev S., Gunka V., Grytsenko Y., Bratychak M. : Chem. Chem. Technol., 2016, 10, 631. https://doi.org/10.23939/chcht10.04si.631
[11] Pyshyev S., Gunka V., Grytsenko Y. et al.: Int. J. Pavement Res. Technol., 2017, 10, 289. https://doi.org/10.1016/j.ijprt.2017.05.001
[12] Demchuk Y., Sidun I., Gunka V. et al.: Chem. Chem. Technol., 2018, 12, 456. https://doi.org/10.23939/chcht12.04.456
[13] Nykypanchuk M., Hrynchuk Y., Olchovyk M.: Chem. Chem. Technol., 2013, 7, 467. https://doi.org/10.23939/chcht07.04.467
[14] Zolotarev V., Pyrig Y., Galkin A.: Road Mater. Pavement Design, 2020, 21, 1399. https://doi.org/10.1080/14680629.2018.1551149 2020
[15] Takamura K., James A.: Paving with Asphalt Emulsions [in:] Huang S.-C., Benedetto H. (Eds.), Advanced Asphalt Materials: Road and Pavement Construction, Woodhead Publishing 2015, 393-426. https://doi.org/10.1016/B978-0-08-100269-8.00013-1
[16] Furlong S., James A., Kalinowski E., Thompson M.: Colloid Surface A, 1999, 152, 147. https://doi.org/10.1016/S0927-7757(98)00628-1
[17] James A.: 2nd Asphalt Technology Conference of the Americas, 1999. https://doi.org/10.1016/S1350-4789(99)90389-6
[18] AkzoNobel Surface Chemistry: Information Bulletin of Department «Additives for road construction», 2012, 83, 13.
[19] AkzoNobel Surface Chemistry: Information Bulletin of Department «Additives for road construction», 2009, 80, 9.
[20] AkzoNobel Surface Chemistry: Information Bulletin of Department «Additives for road construction», 2013, 84, 6.
[21] Solodkyy S., Vollis O., Sidun Iu.: Theory and Building Practice, 2015, 823, 293.
[22] Sidun Iu., Solodkyy S., Vollis O. et al.: JTBP, 2020, 1, 88. https://doi.org/10.23939/jtbp2020.01.088
[23] EN 12591:2009. Bitumen and bituminous binders. Specifications for paving grade bitumens.
[24] ASTM D664. Standard test method for acid number of petroleum products by potentiometric titration.
[25] Didier L., Juan J.: Road Mater. Pavement Design, 2004, 5, 65. https://doi.org/10.1080/14680629.2004.9689988
[26] Hou S., Chen C., Zhang J. et al: Construct. Build. Mater., 2018, 191, 1221. https://doi.org/10.1016/j.conbuildmat.2018.10.091
[27] ISSA A105. Recommended Performance Guideline For Emulsified Asphalt Slurry Seal A105, 2010.
[28] ISSA A143. Recommended Performance Guideline For Micro Surfacing, 2010.
[29] ISSA TB 100. Laboratory Test Method for Wet Track Abrasion of Slurry Surfacing Systems, 2018
[30] ISSA TB 139. Test Method to Determine Set and Cure Development of Slurry Surfacing Systems by Cohesion Tester, 2017
[31] Sidun I.: PhD thesis, Lviv Polytechnic National University, Lviv 2017.
Current Issues
The journal is accepted into Emerging Sources Citation Index (ESCI) - new index in the Web of Science™ Core Collection
The journal is indexed in the international scientometric databases:
