Recent Developments in Polyurethane Foams Containing Low-Cost and Pro-Ecological Modifiers
Affiliation:
1Gdansk University of Technology, 11/12 Narutowicza St., 80-233 Gdansk, Poland
2NovaPUR Sp. z o.o. jozef.haponiuk@pg.gda.pl
DOI:
https://doi.org/10.23939/chcht10.04si.571
| Attachment | Size |
|---|---|
 full_text.pdf | 458.34 KB |
Abstract:
Diversity of the polyurethane (PU) foams applications cause that investigation of the relationships between their structure and properties is currently very popular topic among the many research institutions and companies. At the turn of the last years many scientific papers about PU foams and their composites were published. The one of the main trends in research in this field is related to the reduction of production costs of PU foams. This aim can be successfully achieved through the incorporation of raw materials of natural origin or the utilization of waste materials. This work reviews the progress and recent developments in area of PU foams containing low-cost and pro-ecological modifiers, such as crude glycerol, liquefied biomass, ground tire rubber, etc.
References:
[1] Prociak A., Rokicki G., Ryszkowska J.: Materiały Poliuretanowe, PWN,Warszawa 2014.
[2] Commission implementing decision (EU) 2016/1362 of 9 August 2016 on recognition of the 'Roundtable on Sustainable Biomaterials EU RED' for demonstrating compliance with the sustainability criteria under Directives 98/70/EC and 2009/28/EC of the European Parliament and of the Council.
[3] http://www.theicct.org/issues/co2-standards.
[4] http://ebb-eu.org/.
[5] http://www.eia.gov/biofuels/issuestrends/pdf/bit.pdf.
[6] Pott R., Howe C. and Dennis J.: Bioresource Technol., 2014, 152, 464.
https://doi.org/10.1016/j.biortech.2013.10.094
[7] Hejna A., Kosmela P., Formela K. et al.: Renew. Sust. Energ. Rev., 2016, 66, 449.
https://doi.org/10.1016/j.rser.2016.08.020
[8] Martin A. and Richter M.: Eur. J. Lipid. Sci. Tech., 2011, 113, 100.
https://doi.org/10.1002/ejlt.201000386
[9] Marion H. et al.: Biomaterials, 2006, 27, 5471.
https://doi.org/10.1016/j.biomaterials.2006.06.030
[10] Gholami Z., Abdulla A. and Lee K.: Renew. Sus. Energ. Rev., 2014, 39, 327.
https://doi.org/10.1016/j.rser.2014.07.092
[11] Frey H. nad Haag R.: Mol. Biotechnol., 2002, 90, 257.
https://doi.org/10.1016/S1389-0352(01)00063-0
[12] Sunder A., Hanselmann R., Frey H. and Mulhaupt R.: Macromolecules, 1992, 32, 4240.
https://doi.org/10.1021/ma990090w
[13] Criminna R., Katrynio B., Paul S. et al.: Org. Prcoess Res. Dev., 2015, 19, 748.
https://doi.org/10.1021/op500313x
[14] Barrault J., Clacens J. and Pouilloux Y. : EP1292557, 2006.
[15] Hasenhuettl G.: Food Emulsifiers and Their Application, 2008, 11.
[16] Gandini A. and Lacerda T.: Prog. Polym. Sci., 2015, 48, 1.
https://doi.org/10.1016/j.progpolymsci.2014.11.002
[17] Lemke D. and Nivens S.: Pat. US 20080306211, Publ. Dec. 11, 2008.
[18] Mat R., Samsudin R., Mohamed M. and Johari A.: B. Chem. React. Eng. Catalysis, 2012, 7, 142.
[19] Helwani Z., Othman M., Aziz N. et al.: Appl. Catal. A, 2009, 363, 1.
https://doi.org/10.1016/j.apcata.2009.05.021
[20] Chopade S., Kulkarni K., Kulkarni A. and Topare N.: Acta Chimica Pharmac. Indica, 2012, 2, 8.
[21] Din N., Idris Z., Kian Y. and Hassan H.: J. Oil. Palm. Res., 2013, 25, 289.
[22] Wirpsza Z. and Banasiak S.: Pat. PL 210779, Publ. Feb. 29, 2012.
[23] Soi H., Bakar Z., Nik Siti M. et al.: Pat. US 8816132 B2, Publ.Aug. 26, 2014.
[24] Guerrero-Perez M. and Banares M.: Chem. Sus. Chem., 2008, 1, 511.
https://doi.org/10.1002/cssc.200800023
[25] Chai S., Wang H., Liang Y. and Xu B.: Green Chem., 2008, 10, 1087.
https://doi.org/10.1039/b805373a
[26] Chai S., Wang H., Liang Y. and Xu B.: Appl. Catal. A, 2009, 353, 213.
https://doi.org/10.1016/j.apcata.2008.10.040
[27] Ning L., Ding Y., Chen W. et al.: Chin. J. Catal., 2009, 29, 212.
https://doi.org/10.1016/S1872-2067(08)60026-1
[28] Piszczyk L., Strankowski M., Danowska M. et al.: Eur. Polym. J., 2014, 57, 143.
https://doi.org/10.1016/j.eurpolymj.2014.05.012
[29] Nikje M. and Nikrah M.: Polym. Bull., 2007, 58, 411.
https://doi.org/10.1007/s00289-006-0683-3
[30] Simon D., Borreguero A., de Lucas A. and Rodriguez J.: Polym. Degrad. Stabil., 2015, 121, 126.
https://doi.org/10.1016/j.polymdegradstab.2015.09.001
[31] Kopczynska P. and Datta J.: Polym. Int., 2016, 65, 946.
https://doi.org/10.1002/pi.5128
[32] Kopczynska P., Calvo-Correas T., Eceiza A. and Datta J.: Eur. Polym. J., 2016, 85, 26.
https://doi.org/10.1016/j.eurpolymj.2016.09.063
[33] Bogoczek R. and Kociolek-Balawejder E.:Technologia Chemiczna Organiczna, Wroclaw 1992.
[34] Wang H., Chen H.Z: J. Chin. Inst. Chem. Eng., 2007, 38, 95.
https://doi.org/10.1016/j.jcice.2006.10.004
[35] Zhang H., Pang H., Zhang L. et al.: J. Polym. Environ., 2013, 21, 329.
https://doi.org/10.1007/s10924-012-0542-2
[36] Yoshioka M., Nishio Y., Saito D. et al.: J. Appl. Polym. Sci., 2013, 130, 622.
https://doi.org/10.1002/app.39167
[37] Hu S., Wan C. and Li W.: Bioresource Technol., 2012, 103, 227.
https://doi.org/10.1016/j.biortech.2011.09.125
[38] Yamada T. and Ono H.: J. Wood Sci., 2001, 47, 458.
https://doi.org/10.1007/BF00767898
[39] Yamada T., Aratani M., Kubo S. and Ono H.: J. Wood Sci., 2007, 53, 487.
https://doi.org/10.1007/s10086-007-0886-8
[40] Zhang T., Zhou Y., Liu D. and Petrus L.: Bioresource Technol., 2007, 98, 1454.
https://doi.org/10.1016/j.biortech.2006.03.029
[41] Ono H., Yamada T., Hatano Y. and Motohashi K.: J. Adhesion, 1996, 59, 135.
https://doi.org/10.1080/00218469608011083
[42] Muna S. and Jang J.: J. Ind. Eng. Chem., 2009, 15, 743.
https://doi.org/10.1016/j.jiec.2009.09.056
[43] Jin Y., Ruan X., Cheng X. and Lu Q.: Bioresource Technol., 2011, 102, 3581.
https://doi.org/10.1016/j.biortech.2010.10.050
[44] Yona A., Budija F., Kricej B. et al.: Ind. Crop.Prod., 2014, 54, 296.
https://doi.org/10.1016/j.indcrop.2014.01.027
[45] Hu S.: Production and Characterization of Bio-based Polyols and Polyurethanes from Biodiesel-derived Crude Glycerol and Lignocellulosic Biomass. Doctor of Philosophy, Ohio State University, 2013.
[46] Brand S., Susanti R., Kim S. et al.:Energy, 2013, 59, 173.
https://doi.org/10.1016/j.energy.2013.06.049
[47] Harry I., Ibrahim H., Thring R. and Idem R.: Biomass Bioenerg., 2014, 71, 381.
https://doi.org/10.1016/j.biombioe.2014.09.017
[48] Clacens J., Pouilloux Y., Barrault J. et al: Stud. Surf. Sci. Catal., 1998, 118, 895.
https://doi.org/10.1016/S0167-2991(98)80257-7
[49] Aslan N.: Powder. Technol., 2008, 185, 80.
https://doi.org/10.1016/j.powtec.2007.10.002
[50] Salehpour S. and Dube M.: Macromol. Chem. Phys., 2011, 212, 1284.
https://doi.org/10.1002/macp.201100064
[51] Gandini A. and Lacerda T.: Prog. Polym. Sci., 2015, 48, 1.
https://doi.org/10.1016/j.progpolymsci.2014.11.002
[52] Lemke D. and Nivens S.: Pat. US 20080306211, Dec. 11, 2008.
[53] Mat R., Samsudin R., Mohamed M. and Johari A.: Bull. Chem. React. Eng. Catal., 2012, 7, 142.
https://doi.org/10.9767/bcrec.7.2.3047.142-149
[54] Helwani Z., Othman M., Aziz N. et al.: Appl. Catal. A, 2009, 363, 1.
https://doi.org/10.1016/j.apcata.2009.05.021
[55] Nik Siti M., Idris Z., Shoot K. and Hassan H.: J. Oil Palm Res., 2013, 25, 289.
[56] Klukowska-Majewska Z., Mroczek T., Osiejuk E. et al.: PL176878, Publ. Nov. 10, 1994.
[57] Antonovic A., Jambrekovic V., Kljak J. et al.: Drvna Industrija, 2010, 61, 5.
[58] Helwani Z., Othman M., Aziz N. et al.: Appl. Catal. A, 2009, 363, 1.
https://doi.org/10.1016/j.apcata.2009.05.021
[59] Koga N., Matsumoto S., Miyata A. et al.: Pat. EP 2080778, Jul. 22, 2009.
[60] Ionescu M. and Petrovic Z.: J. Cell. Plast., 2010, 46, 223.
https://doi.org/10.1177/0021955X09355887
[61] Pan H.: Renew. Sust. Energ. Rev., 2011, 15, 3454.
https://doi.org/10.1016/j.rser.2011.05.002
[62] Hu S. and Li Y.: Bio.Tech., 2014, 161, 410.
https://doi.org/10.1016/j.biortech.2014.03.072
[63] Hu S. and Li Y.: Ind. Crop. Prod., 2014, 57, 188.
https://doi.org/10.1016/j.indcrop.2014.03.032
[64] Hu S., Wan C. and Li Y.: Bioresource Technol., 2012, 103, 227.
https://doi.org/10.1016/j.biortech.2011.09.125
[65] Wang Y., Wu J., Wan Y. et al.: Int. J. Agric. Biol. Eng., 2009, 2, 32.
[66] Kosmela P., Hejna A., Formela K. et al.: Cellulose, 2016, 23, 2929.
https://doi.org/10.1007/s10570-016-1034-7
[67] Piszczyk L., Danowska M., Kosmela P. et al.: Pat. EP. 15460078.7. Publ. Sept. 02, 2015
[68] Cachaco A., Afonso M. and Pinto M.: J. Appl. Polym. Sci., 2013, 129, 2873.
https://doi.org/10.1002/app.38962
[69] Zhang X., Lu Z., Tian D. et al.: J. Appl. Polym. Sci., 2013, 127, 4006.
https://doi.org/10.1002/app.37721
[70] Piszczyk L., Hejna A., Formela K. et al.: Iran. Polym. J., 2014, 24, 75.
https://doi.org/10.1007/s13726-014-0301-4
[71] Piszczyk L., Hejna A., Danowska M. et al.: J. Reinf. Plast. Comp., 2015, 34, 708.
https://doi.org/10.1177/0731684415579089
[72] Gayathri R., Vasanthakumari R. and Padmanabhan C.: Int. J. Eng. Sci., 2013, 4, 302.
[73] Bryskiewicz A., Zieleniewska M., Przyjemska K. et al.: Polym. Degrad. Stabil., 2016, 132, 32.
https://doi.org/10.1016/j.polymdegradstab.2016.05.002
[74] Kuranska M. and Prociak A.: Compos. Sci. Technol., 2012, 72, 299.
https://doi.org/10.1016/j.compscitech.2011.11.016
[75] Zieleniewska M., Leszczynski M., Szczepkowski L. et al.: Polym. Degrad. Stabil., 2016, 132, 78.
https://doi.org/10.1016/j.polymdegradstab.2016.02.030
[76] Wrzesniewska-Tosik K., Zajchowski S., Bryskiewicz A. and Ryszkowska J.: Fibers. Text. East. Eur., 2014, 22, 119.
Current Issues
The journal is accepted into Emerging Sources Citation Index (ESCI) - new index in the Web of Science™ Core Collection
The journal is indexed in the international scientometric databases:
