Error message

  • Deprecated function: Unparenthesized `a ? b : c ? d : e` is deprecated. Use either `(a ? b : c) ? d : e` or `a ? b : (c ? d : e)` in include_once() (line 1439 of /home/science2016/public_html/includes/bootstrap.inc).
  • Deprecated function: Array and string offset access syntax with curly braces is deprecated in include_once() (line 3557 of /home/science2016/public_html/includes/bootstrap.inc).

Influence of Filling on Water Uptake of Films Based on Water-Borne Coating Materials

Ivan Kas’yanenko, Halyna Neskorozhena, Viktor Kramarenko
Affiliation: 
National Technical University “Kharkiv Polytechnic Institute”, 2, Kyrpychova St., 61002 Kharkiv, Ukraine kram.cap@gmail.com
DOI: 
https://doi.org/10.23939/chcht12.04.466
AttachmentSize
PDF icon full_text.pdf168.49 KB

Keywords:

Abstract: 
The effect of filling on water uptake has been studied for coatings based on aqueous dispersion Acronal-290D and pigment part consisting of titanium dioxide and calcium carbonate. It was found that an increase in the pigment volume concentration is accompanied by an increase in the rate of water absorption, but the maximum value of water uptake is characterized by a minimum near the critical pigment volume concentration. It was shown that at a low degree of filling of the films, water absorption is a long-term process, the kinetics of which can be described by superposition of two functions that take into account both the Fickian character of water diffusion and the relaxation process, associated with structural changes in the samples.
References: 

[1] ISO 7783:2011 Paints and varnishes: Determination of water-vapour transmission properties.

[2] EN 1062-3:2008 Paints and varnishes: Coating materials and coating systems for exterior masonry and concrete. Part 3: Determination of liquid water permeability.

[3] Wel G., Adan O.: Prog. Org. Coat., 1999, 37, 1. https://doi.org/10.1016/S0300-9440(99)00058-2
https://doi.org/10.1016/S0300-9440(99)00058-2

[4] Zhu A., Cai A., Yu Z., Zhou W.: J. Coll. Inter. Sci., 2008, 322, 51. https://doi.org/10.1016/j.jcis.2008.02.014
https://doi.org/10.1016/j.jcis.2008.02.014

[5] Maksimov R., Gaidukovs S., Zicans J., Jansons J.: Mech. Compos. Mater., 2008, 44, 505. https://link.springer.com/article/10.1007/s11029-008-9041-x
https://doi.org/10.1007/s11029-008-9041-x

[6] Donkers P., Huinink H., Erich S. et al.: Prog. Org. Coat., 2013, 76, 60. https://doi.org/10.1016/j.porgcoat.2012.08.011
https://doi.org/10.1016/j.porgcoat.2012.08.011

[7] Jubete E., Liauw C., Allen N.: Prog. Org. Coat., 2007, 59, 126. https://doi.org/10.1016/j.porgcoat.2007.01.021
https://doi.org/10.1016/j.porgcoat.2007.01.021

[8] Kas'yanenko I., Kramarenko V.: Vopr. Khimii ta Khim. Tech., 2016, 2, 68. http://nbuv.gov.ua/UJRN/Vchem_2016_2_14

[9] Agarwal N., Farris R.: J. Appl. Polym. Sci., 1999, 72, 1407. https://doi.org/10.1002/(SICI)1097-4628(19990613)72:11<1407::AID-APP4>3.0.CO;2-5
https://doi.org/10.1002/(SICI)1097-4628(19990613)72:11<1407::AID-APP4>3.0.CO;2-5

[10] Snuparek J., Bidman A., Hantus J., Hajkova B.: J. Appl. Polym. Sci., 1983, 28, 1421. https://doi.org/10.1002/app.1983.070280415
https://doi.org/10.1002/app.1983.070280415

[11] Butler L., Fellows C., Gilbert R.: J. Appl. Polym. Sci., 2004, 92, 1813. https://doi.org/10.1002/app.20150
https://doi.org/10.1002/app.20150

[12] Liu Y., Gajewicz A., Rodin V. et al.: J. Polym. Sci. Polym. Phys., 2016, 54, 1658. https://doi.org/10.1002/polb.24070
https://doi.org/10.1002/polb.24070

[11] Jiang B., Tsavalas J., Sundberg D.: Prog. Org. Coat., 2017, 105, 56. https://doi.org/10.1016/j.porgcoat.2016.12.027
https://doi.org/10.1016/j.porgcoat.2016.12.027

[12] ASTM D 5229/D 5229M–92 (Reapproved 2004) Standard test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials.

[13] Van Krevelen D., Te Nijenhuis K.: Properties of Polymers. Elsevier, Amsterdam 2009.
https://doi.org/10.1016/B978-0-08-054819-7.00001-7

[14] Bieleman J.: Additives for Coatings, WILEY-VCH Verlag GmbH, Weinheim 2000.
https://doi.org/10.1002/9783527613304

[15] Maksimov R., Gaidukovs S., Kalnins M. et al.: Mech. Compos. Mater., 2006, 42, 45. https://link.springer.com/article/10.1007/s11029-006-0015-6
https://doi.org/10.1007/s11029-006-0015-6

[16] Berens A., Hopfenberg H.: Polymer, 1978, 19, 489. https://doi.org/10.1016/0032-3861(78)90269-0
https://doi.org/10.1016/0032-3861(78)90269-0