Error message

  • Deprecated function: Unparenthesized `a ? b : c ? d : e` is deprecated. Use either `(a ? b : c) ? d : e` or `a ? b : (c ? d : e)` in include_once() (line 1439 of /home/science2016/public_html/includes/bootstrap.inc).
  • Deprecated function: Array and string offset access syntax with curly braces is deprecated in include_once() (line 3557 of /home/science2016/public_html/includes/bootstrap.inc).

Effect of Phenol-Cresol-Formaldehyde Resin on Adhesive and Physico-Mechanical Properties of Road Bitumen

Yuriy Demchuk1, Iurii Sidun2, Volodymyr Gunka1, Serhiy Pyshyev1, Serhiy Solodkyy2
Affiliation: 
1 Institute of Chemistry and Chemical Technology Lviv Polytechnic National University, 12, Bandera St., 79013 Lviv, Ukraine 2 Institute of Building and Environmental Engineering, Lviv Polytechnic National University, 12, Bandera St., 79013 Lviv, Ukraine yuriy_demchuk@ukr.net
DOI: 
https://doi.org/10.23939/chcht12.04.456
AttachmentSize
PDF icon full_text.pdf151.39 KB

Keywords:

Abstract: 
The phenol-cresol-formaldehyde resin (PhCR-F) obtained from phenolic fraction of coal tar has been synthesized via the polycondensation method of “raw” phenols with formaldehyde. The modification of road bitumen by this resin was carried out. PhCR-F in different concentrations was found to be effectively used as a modifier of road bitumen. It was shown that PhCR-F is an effective adhesive additive for road bitumen. The structural types of the oxidized and modified bitumen were determined according to the group-chemical composition and calculated criteria.
References: 

[1] Pyshyev S., Gunka V., Grytsenko Y., Bratychak M.: Chem. Chem. Technol., 2016, 10, 631. https://doi.org/10.23939/chcht10.04si.631
[2] Zhu J., Birgisson B., Kringos N.: Eur. Polym. J., 2014, 54, 18. https://doi.org/10.1016/j.eurpolymj.2014.02.005
[3] Bulatovic V., Rek V., Markovic K.: J. Mater. Res. Innovat., 2012, 16, 1. https://doi.org/10.1179/1433075X11Y.0000000021
[4] Pyshyev S., Gunka V., Grytsenko Y. et al.: Int. J. Pavement Res. Technol., 2017, 10, 289. https://doi.org/10.1016/j.ijprt.2017.05.001
[5] Tarasov R., Makarova L., Kadomtseva A.: Modern Sci. Res. Innovat., 2014, 5, 1. http://web.snauka.ru/en/issues/2014/05/34687
[6] Nykypanchuk M., Hrynchuk Yu., Olchovyk M.: Chem. Chem. Technol., 2013, 7, 467.
[7] Galdina V.: Modifitsirovannye Bitumy. SibADI, Omsk 2009.
[8] Strap G., Astakhova O., Lazorko O. et al.: Chem. Chem. Technol., 2013, 7, 279.
[9] Çubuk M., Gürü M., Arslan D.: J. Mater. Civil Eng., 2014, 26, 4014. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000889
[10] Pyshyev S., Grytsenko Yu., Solodkyy S. et al.: Chem. Chem. Technol., 2015, 9, 359. https://doi.org/10.23939/chcht09.03.359
[11] Pavlovych L., Solovieva N.: Vestnik Sibirskogo Gos. Ind. Univ., 2016, 1, 35.
[12] Melnyk Yu., Reutskyy V., Reutskyy Vol., Starchevskyy V.: Chem. Chem. Technol., 2014, 8, 177.
[13] Toroptseva A., Belgorodskaya K., Bondarenko V.: Laboratornyi Praktikum po Khimii i Tekhnologii Vysokomolekuliarnykh Soedineniy. 1972.
[14] Demchuk Y., Gunka V., Pyshyev S., Bratychak M.: Uglekhim. Zh., 2017, 5, 23.
[15] Zolotaryov V., Pyrih Ya., Galkin A., Kudriavtseva-Valdes S.: Avtoshliahovyk Ukrainy, 2010, 4, 32.
[16] Kolbanovskaya A., Mikhailov V.: Dorozhnye Bitumy. Transport, Moskwa 1973.
[17] Marcusson J.: Angew. Chem., 1916, 29, 346. https://doi.org/10.1002/ange.19160297303
[18] BS EN 12591:2009 Bitumen and Bituminous Binders – Specifications for Paving Grade Bitumens.