Structural, Thermal and Electrical Properties of Doped Poly(3,4 ethylenedioxythiophene)
Affiliation:
1 Department of Physics, Institute of Science, Civil Lines, Nagpur – 440 001, India
2 Electronic Science Department, H.P.T.Arts &R.Y.K.Science College, Nasik, India
abchourasiansk@rediffmail.com
DOI:
https://doi.org/10.23939/chcht10.04.395
| Attachment | Size |
|---|---|
 full_text.pdf | 377.32 KB |
Abstract:
Poly(3,4-ethylenedioxythiophene) (PEDOT) was chemically synthesized, undoped and then re-doped using FeCl3 as well as camphorsulfonic acid (CSA). FT-IR results confirm the nature of the synthesized and doped samples. XRD analysis indicates crystal structure modification after doping and was also used to calculate crystallinity of samples. Crystallinity increases after FeCl3 doping, whereas it reduces due to CSA doping. TGA-DTA results show reduction in Tg value for FeCl3 doped sample while it increases for CSA doped samples compared to that of undoped PEDOT. Reduction in Tg indicates plasticizing effect of FeCl3 whereas increase in Tg show anti-plasticizing effect of CSA in PEDOT. Conductivity value () increases by two orders of magnitude after doping. Log vs. 1/T graph show metallic nature of undoped PEDOT above 308 K, however both doped samples show semiconducting nature from 301 to 383 K.
References:
[1] Groenendaal B., Jonas F., Freitag D. et al.: Adv. Mater., 2002, 12, 481.
https://doi.org/10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C
[2] Selvaganesh S., Mathiyarasu J., Phani K. and Yegnaraman V.: Nanoscale Res. Lett., 2007, 2, 546.
https://doi.org/10.1007/s11671-007-9100-6
[3] Wang Y., Jia W., Strout T et al.: Sensors, 2009, 9, 6752.
https://doi.org/10.3390/s90906752
[4] Jonas F., Kraft W. and Muys B.: Macromol. Symp., 1995, 100, 169.
https://doi.org/10.1002/masy.19951000128
[5] Bayer A.: Eur. Pat., 1991, 440, 957.
[6] Louwet F., Groenendaal B., Dhaen J. et al.: Synth. Met., 2003, 135, 115.
https://doi.org/10.1016/S0379-6779(02)00518-0
[7] Groenendaal B., Zotti G., Aubert P. et al.: Adv. Mater., 2003, 15, 855.
https://doi.org/10.1002/adma.200300376
[8] Bashir T., Ali M., Cho S. et al.: Polym. Adv. Technol., 2013, 24, 210.
https://doi.org/10.1002/pat.3073
[9] Corradi R. and Armes S.: Synth. Met., 1997, 84, 453.
https://doi.org/10.1016/S0379-6779(97)80828-4
[10] Zhan L., Song Z., Zhang J. et al.: Electrochim. Acta, 2008, 53, 8319.
https://doi.org/10.1016/j.electacta.2008.06.053
[11] Meng H., Perepichka D., Bedikov M. et al.: J. Am. Chem. Soc., 2003, 125, 15151.
https://doi.org/10.1021/ja037115y
[12] Yamamoto T. and Abla M.: Synth. Met., 1999, 100, 237.
https://doi.org/10.1016/S0379-6779(99)00005-3
[13] Pavia D., Lampman G. and Kris G.: Introduction to Spectroscopy. Thomson Brooks/Cole, Belmont 2007.
[14] Bhadra S. and Khastagir D.: Polym. Test., 2008, 27, 851.
https://doi.org/10.1016/j.polymertesting.2008.07.002
[15] Ramakanth Hebbar K.: Basics of X-ray Diffraction and its Applications, 1st edn. I.K. Int. Publ. House Pvt. Ltd. New Delhi 2007.
[16] Pouget J., MacDiramid A. and Epstein A.: Macromolecules, 1991, 24, 779.
https://doi.org/10.1021/ma00003a022
[17] Manjunath B., Venkataraman A. and Stephen T.: J. Appl. Polym. Sci., 1973, 17, 1091.
https://doi.org/10.1002/app.1973.070170407
Current Issues
The journal is accepted into Emerging Sources Citation Index (ESCI) - new index in the Web of Science™ Core Collection
The journal is indexed in the international scientometric databases:
